How do I replace the conector of an Aeroflex mesh backpack?
A backpack often has to withstand a lot of outdoor activities. Frequent use can cause the conector to break and need replacing. We'll show you how to replace a broken conector with a new one and get your backpack ready for use again!
Tools required:
Conector Aeroflex (only available from the repair workshop)
Difficulty: easy
Duration: five minutes
Please note : For better visibility, we have used an Aeroflex frame detached from the backpack for the instructions. You do not need to remove the backpack frame beforehand!
The wire frame must rest on the conector. Then press the frame into one side of the conector until it clicks.
Then press the frame into the other side. It must click again.